Garage Door Repair Kenmore, WA | Springs, Openers & Doors

Area at a glance

Serving Kenmore, WA

Redmond WA Garage Door Repair is the local garage door company serving Kenmore, about 9 miles northwest of our NE 83rd St shop at 16180 NE 83rd St.

Main roads: Bothell Way NE (SR 522), Juanita Dr NE, 68th Ave NE
Near: Rhododendron Park, north end of Lake Washington
Homes: Mid-century homes, lakeside properties and new townhomes
ZIP code: 98028
Distance: About 9 miles northwest of our NE 83rd St shop

Local garage door needs

What Kenmore homeowners call us for

Many Kenmore homes date from the 1950s to 1970s and still run on original tracks and rollers, or openers without modern safety sensors. Lakeside moisture also wears out cables and bottom brackets faster.

Redmond WA Garage Door Repair is the garage door technicians in Redmond that Kenmore homeowners book for careful, safety-tested work. Read our garage door reviews, or contact our garage door team with a question.

Common springs, cables and rollers carried on the truck
Full price approved before work starts
Every door balanced and safety-tested

Blue colonial home with an attached garage in Kenmore — ZIP 98028Kenmore

Popular in Kenmore

Garage door services in Kenmore

01

Roller & Track Repair in Kenmore

Off-track doors, bent tracks and worn rollers put right.

02

Opener Repair in Kenmore

Openers that hum, click, reverse or ignore the remote.

03

Cable Repair in Kenmore

Frayed or snapped lift cables and drums replaced safely.

04

Garage Door Installation in Kenmore

New insulated steel, carriage and modern doors, measured and installed.

Reviews

What local customers say

Got home from work and the garage door made a loud bang when I tried to open it. Turns out the torsion spring had snapped. They came out with the replacement spring and had the door working again that afternoon. Very straightforward from the first call.

The opener would hum but the door wouldn't move. I was expecting to need a whole new opener, but they found the problem with the drive system and repaired it. They also checked the safety sensors before leaving. Good experience.

Our garage door started reversing every time it reached the floor. They checked the sensors and opener settings and found that one sensor had shifted slightly. Took care of it during the appointment and didn't try to sell me a new opener.

Door came off the track after one of the rollers failed. I didn't want to force it and make things worse. They got the door safely back on track, replaced the bad roller and checked the rest of the hardware. Finished much quicker than I expected.

Our old opener finally gave up after years of problems. We went with a wall-mount opener with Wi-Fi and battery backup. Installation was neat, and the technician walked us through the controls before leaving. Much quieter than the old setup.

Our garage door was slow, loud and shaking pretty badly. Instead of immediately recommending replacement, they went through the whole system and found several worn components. After the tune-up and roller replacement, it feels like a completely different door.

Got home from work and the garage door made a loud bang when I tried to open it. Turns out the torsion spring had snapped. They came out with the replacement spring and had the door working again that afternoon. Very straightforward from the first call.

The opener would hum but the door wouldn't move. I was expecting to need a whole new opener, but they found the problem with the drive system and repaired it. They also checked the safety sensors before leaving. Good experience.

Our garage door started reversing every time it reached the floor. They checked the sensors and opener settings and found that one sensor had shifted slightly. Took care of it during the appointment and didn't try to sell me a new opener.

Door came off the track after one of the rollers failed. I didn't want to force it and make things worse. They got the door safely back on track, replaced the bad roller and checked the rest of the hardware. Finished much quicker than I expected.

Our old opener finally gave up after years of problems. We went with a wall-mount opener with Wi-Fi and battery backup. Installation was neat, and the technician walked us through the controls before leaving. Much quieter than the old setup.

Our garage door was slow, loud and shaking pretty badly. Instead of immediately recommending replacement, they went through the whole system and found several worn components. After the tune-up and roller replacement, it feels like a completely different door.

Our garage door had become really noisy and started shaking during the last few inches of closing. The technician checked the rollers, tracks and balance and found a couple of worn rollers. Replaced those and adjusted the door. It's noticeably quieter now.

One of our lift cables came off and the garage door was hanging crooked. They told me not to try opening it until someone looked at it. Came out, replaced the damaged cable and checked the drums and springs. Door is running perfectly again.

We needed to replace an old garage door that had seen better days. They measured everything, showed us several options and helped us choose an insulated steel door. Installation was clean and the new door looks great with the house.

The bottom seal had gotten hard and cracked, and we were getting leaves and water into the garage whenever it rained. They replaced the seal and adjusted the door so it was sitting properly against the floor. Small repair, but exactly what we needed.

Had a spring problem on a Saturday and wasn't sure if anyone would come out. They were able to schedule us that day. The technician explained why the spring failed and checked the balance of the entire door after replacing it. No complaints.

We had an older garage door with a damaged panel and weren't interested in replacing the entire door. They were able to match the replacement section closely and get everything aligned properly. The repair looks much better than I expected.

Our garage door had become really noisy and started shaking during the last few inches of closing. The technician checked the rollers, tracks and balance and found a couple of worn rollers. Replaced those and adjusted the door. It's noticeably quieter now.

One of our lift cables came off and the garage door was hanging crooked. They told me not to try opening it until someone looked at it. Came out, replaced the damaged cable and checked the drums and springs. Door is running perfectly again.

We needed to replace an old garage door that had seen better days. They measured everything, showed us several options and helped us choose an insulated steel door. Installation was clean and the new door looks great with the house.

The bottom seal had gotten hard and cracked, and we were getting leaves and water into the garage whenever it rained. They replaced the seal and adjusted the door so it was sitting properly against the floor. Small repair, but exactly what we needed.

Had a spring problem on a Saturday and wasn't sure if anyone would come out. They were able to schedule us that day. The technician explained why the spring failed and checked the balance of the entire door after replacing it. No complaints.

We had an older garage door with a damaged panel and weren't interested in replacing the entire door. They were able to match the replacement section closely and get everything aligned properly. The repair looks much better than I expected.

My opener has no safety sensors. Should I replace it?

Yes. Openers without sensors don't meet current safety standards.

Do you replace old one-piece garage doors?

Yes. We replace tilt-up doors with modern sectional doors where the opening allows.

Is Kenmore in your service area?

Yes. We serve all of Kenmore.

Which garage door company serves Kenmore?

Redmond WA Garage Door Repair serves Kenmore and ZIP 98028. We repair springs, cables, rollers, tracks and openers and install new doors, and you can book online in under two minutes.

How much does garage door repair cost in Kenmore?

It depends on the part, the door size and weight, and how many parts are needed. We quote the full price on site before any work starts.

Do I need a permit for a new garage door in Kenmore?

Replacing a garage door in the same opening usually doesn't need a permit, but changing the opening size or structure can. Permits are handled by the City of Kenmore or King County, depending on the address. We check before we start.

What garage door problems are most common in Kenmore?

In Kenmore we most often see mid-century homes, lakeside properties and new townhomes needing roller & track repair, opener repair, cable repair.

Can I book garage door service in Kenmore online?

Yes. Fill in the short form at the top of this page or tap "Book Now". We'll call or text to confirm a time.

How far is Kenmore from your shop?

Our shop is at 16180 NE 83rd St, Redmond. About 9 miles northwest of our NE 83rd St shop.

Do you work on commercial doors in Kenmore?

Yes. Along with home garage doors, we repair and install rolling steel, sectional and dock doors for local businesses.

Nearby

Other areas we serve near Kenmore

All service areas

AreaZIPFrom shop

Garage door repair in Kirkland980335 mi W Garage door repair in Bellevue980047 mi SW Garage door repair in Sammamish980746 mi SE Garage door repair in Woodinville980726 mi N Garage door repair in Bothell980118 mi NW Garage door repair in Duvall9801910 mi NE Garage door repair in Issaquah9802713 mi S Garage door repair in Fall City9802413 mi SE

Garage Door Repair in Kenmore, WA